Polaris Sportsman XP 1000 S 2020 Service Manual page 387

6. After the new ball joint is fully installed into the A-arm,
install a new retaining ring.
NOTICE
Image for reference only.
7. Repeat the ball joint service procedure for any
additional A-arm ball joint replacements.
8. Insert upper / lower A-arm ball joint end into the
bearing carrier.
9. If needed, install new brake caliper mounting bolts
and torque to specification.
IMPORTANT
New bolts have a pre-applied locking agent which is
destroyed upon removal. Always use new brake caliper
mounting bolts upon assembly.
TORQUE
Front Caliper Mounting Fasteners
45 ft-lbs (61 N·m)
Rear Caliper Mounting Fasteners
40 ft-lbs (54 N·m)
10. Install wheel and (4) wheel nuts. Torque wheel nuts to
specification.
TORQUE
Wheel Lug Nuts
120 ft-lbs (162 N·m)
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
STEERING / SUSPENSION
9.21
9