Polaris Sportsman XP 1000 S 2020 Service Manual page 345

Symptom: AWD Will Not Engage
1. Check the gearcase coil resistance. To test the gearcase coil resistance, use the coil harness (Grey & Brown/
White).
To test the gearcase coil resistance, use the coil harness. The gearcase coil should measure between 22.8 ohms and
2. Check the minimum battery voltage at the Grey & Brown/White wires that feed the hub coil wires.
3. Inspect the armature plate
inside the other). If only one band of wear is present (or if there is wear between the two bands, inspect the coil
area as indicated in Step 4. A band with an interrupted wear mark may indicate a warped plate, which may cause
intermittent operation.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
© Copyright Polaris Inc.
NOTICE
25.2 ohms.
ADC Front Gearcase Coil Resistance
B-C (4X4): 23 Ω ±4Ω
A–D (4X4 ADC): 12.49 Ω ±4Ω
AWD Coil Applied Battery Voltage:
11.80-12.0 Vdc
e
for a consistent wear pattern. There should be two distinct wear bands
FINAL DRIVE
r
8
(one band
8.33