BODY ELECTRICAL
DRIVE LINE SWITCH
Move the switch to the RUN position and test.
Use a multimeter to test for continuity between the two
switch outputs (ADC/AWD).
NOTICE
Selecting 2x4 drive mode does not complete any
circuits. All circuits should be OL when 2x4 is selected.
Move the drive selector switch to each drive mode, and
then test for continuity.
If any of the tests fail, replace the RH throttle / switch
assembly.
OFF / RUN SWITCH
Use a multimeter to test for continuity when the LH
switch is moved to the RUN position. If the test fails,
replace the LH control assembly.
9931493 R03 - 2020-2021 Sportsman XP 1000 S Service Manual
12.8
© Copyright Polaris Inc.