Morphy Richards 48326EE Instructions Manual page 6

BM48327MEE Rev1.qxp_9225 47507 MEE pump - Jon 25/10/2015 17:34 Page 6
5
6
7
8
9
1 0
Press start
Close the lid of the breadmaker and push the start button
panel. The breadmaker will then start kneading your ingredients.
Viewing the progress
To check on the progress of your bread during cooking we have put a Viewing
Window in the top of the Lid, don't be tempted to open the Lid during the
¤
baking process though as this will affect the final results of your bread.
Keep warm
When the loaf has finished baking the breadmaker will beep for 3 seconds*
and then automatically go into keep warm mode for 60 minutes. The LCD
Display will count up in minutes, and the flashing loaf icon will appear.
The loaf is ready at this time and can be removed, there is no need to use or
keep the loaf in the breadmaker for the duration of the keep warm setting.
Switch off the breadmaker.
Remove your bread
To remove the loaf from the breadmaker lift the lid, raise the handle on the
Baking Pan and turn anti-clockwise to unlock the pan from the breadmaker.
Be careful when you remove the Baking Pan from the breadmaker as this will
be very hot, make sure you use oven gloves!
Cool down
Allow the bread to cool in the Baking Pan for 15 minutes then turn the Pan
upside down and tap the bread from the Pan onto a rack to cool.
The Kneading Blade will sometimes stay in the loaf when it is removed
„
from the Baking Pan. Once the loaf has cooled remove the Kneading Blade
with a wooden or plastic utensil.
Clean and enjoy
Once you have removed the Kneading Blade, clean throughly along with the
Baking Pan and Rotating Shaft . After cleaning apply a little sunflower oil
‚ ‰
to the rotating shaft before replacing the Kneading Blade and you will be
ready for your next homemade loaf.
Enjoy your first delicious homemade loaf!
on the control
È