Fault display
(cont.)
Room temperature sensor
User fault
Checking and acknowledging faults
Note
If an acknowledged fault is not removed, the fault message will be re displayed:
On a constant temperature control unit after 24 h
On a weather compensated control unit at 07:00 h the next day
Constant temperature control units
Press the following keys:
1. a/b for further fault codes.
Weather compensated control units
Press the following keys:
1. c
for the current fault.
2. a/b for further fault messages.
Calling up acknowledged fault messages
Press the following keys:
1. d
for approx. 3 s.
Calling up fault codes from the fault memory (fault history)
The 10 most recent faults are saved
and may be scanned.
2. d
all fault messages are
acknowledged simulta-
neously, the fault display
will be deleted and the red
fault indicator continues to
flash.
3. d
all fault messages are
acknowledged simulta-
neously, the fault display
will be deleted and the red
fault indicator continues to
flash.
2. a/b for the acknowledged fault.
The faults are ordered by date, thus
the most recent fault is fault number 1.
Troubleshooting
71