12: Preset Memory - Roland XS-62S Reference Manual

12: PRESET MEMORY

Value (bold text: default
Menu item
value)
LOAD (*14) MEMORY
SAVE MEMORY
DELETE MEMORY
LAST MEMORY,
START UP
MEMORY 1–MEMORY 8
MEMORY PROTECT OFF, ON
(*14) When the [SW MODE] button is lit in blue, the cross-point (upper row) [1]–[8] buttons function as shortcuts for loading to preset memories.
Explanation
This selects the preset memory to load. Pressing the [VALUE] knob lets you load the preset
1–MEMORY 8
memory.
This selects a preset memory for saving settings. Pressing the [VALUE] knob lets you save the
settings to the preset memory.
* The state of the [FREEZE] button and [PHONES] knob are not saved to any preset memory.
The [FREEZE] button is always dark at startup.
* The state of the [SW MODE] button and the settings shown below are saved as global
settings for the unit. They are not saved to preset memories.
Category
1–MEMORY 8
REMOTE
LAN CONTROL
SYSTEM
This selects a preset memory to delete. Pressing the [VALUE] knob lets you delete the preset
1–MEMORY 8
memory.
This specifies the settings loaded at startup.
LAST MEMORY
MEMORY 1–
MEMORY 8
When this is set to "ON, " the preset memories are protected, and settings cannot be saved to
them.
Setting items saved in the unit
All setting items except "CAM AF" and "CAM AE"
* "CAM AF" and "CAM AE" are always set to "OFF" at startup.
All menu items
All setting items except "TEST PATTERN" and "TEST TONE"
* "TEST PATTERN" and "TEST TONE" are always set to "OFF" at
startup.
This restores the state that was in effect immediately
before the power was turned off (Last Memory
feature). The current settings (Last Memory values) are
saved every 4 seconds, and when you exit a menu.
These recall the settings at the selected memory
number.
18
Menu List