Other Features; Saving/Recalling Settings (Preset Memory) - Roland V-8HD Reference Manual

Other Features

Saving/Recalling Settings (Preset Memory)

You can save the current settings, including the video/audio settings and the state of the operating panel, in preset memory and recall those
settings for use when necessary. The V-8HD is provided with eight preset memories.
About the last memory function
The V-8HD has a built-in Last Memory function. Last Memory is a function that saves the state of the unit that is in effect immediately before
power-down, and automatically restores the state at the next startup. The Last Memory function is enabled by default. If you want the unit to
recall a specific preset memory when it starts up, use the PRESET MEMORY menu item "START UP" to specify the preset memory number.
Saving to a preset memory
NOTE
If "MEMORY PROTECT" (p. 61) is "ON, " you can't save settings to a
preset memory.
1 .
Use the [MODE] button to select "MEMORY."
2 .
Press and hold (for 2 seconds or longer) the MEMORY
button for the number where you want to save the
settings.
All of the MEMORY [1]–[8] buttons are briefly illuminated in light
blue, and the current settings are saved in the selected preset
memory.
Recalling a preset memory
1 .
Use the [MODE] button to select "MEMORY."
MEMORY [1]–[8] button illumination color
Light blue
Blue
Unlit
2 .
Press the MEMORY button for the number whose
setting you want to recall.
The settings are recalled.
38
Currently selected memory
Memories in which data is saved
Memories with no data (empty)
MEMO
5 The state of the [OUTPUT FADE] knob and [PHONES] knob are
not saved in preset memory.
5 The following settings are common to the unit (one set for the
entire unit), and therefore are not saved in preset memory.
– PRESET MEMORY menu
– CTL/EXP menu
– CAPTURE IMAGE menu
– SYSTEM menu
5 You can use the [MENU] button0"PRESET MEMORY"0"SAVE"
or "LOAD" to save or load a preset memory.
5 When recalling a preset memory, you can specify the individual
menu items that will be included in the recalled preset memory.
Make these settings in the PRESET MEMORY menu item "LOAD
PARAMETER. "
Initializing a preset memory
Here's how you can initialize the settings of a specific preset memory
to the factory-set condition.
1 .
Press the [MENU] button0"PRESET MEMORY"0
select "INTIALIZE," and press the [VALUE] knob.
2 .
Turn the [VALUE] knob to select the preset memory
(MEMORY 1–8) that you want to initialize, and press
the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 .
Turn the [VALUE] knob to select "YES," and press the
[VALUE] knob.
The current settings are saved. When the operation is finished, the
message "COMPLETE" appears.
4 .
Press the [MENU] button to quit the menu.