Using A Usb Memory Device - Roland V-40HD Owner's Manual

Using a USB Memory Device

Connecting and Formatting a USB Memory Device
When using a USB memory device, give attention to the following points.
• Carefully insert the USB memory all the way in-until it is firmly in place. Also, be careful to orient the USB memory device correctly front and back
and in the correct direction for insertion, and insert it firmly, as far as it will go. Never insert using undue force.
• Operation has been tested for commonly available USB memory devices, but operation of all USB memory devices is not assured. Depending on
the manufacturer and type of the USB memory device, correct operation may not be possible.
1. Connect the USB memory device.
Connect the USB memory device to the USB MEMORY connetor on the rear panel.
2. Display the System menu.
Press the [MENU] button to display the menu. Use the [CURSOR] buttons to select [System], then press the [ENTER] button to
display the System menu.
fig.open-system-menu.eps
3. Select the Format menu.
Use the [CURSOR] buttons to go to [USB Memory] and select [Format], then press the [ENTER] button.
fig.format-menu.eps
4. Format the USB memory device.
Pressing the [ENTER] button in step 3 makes the message [Push ENTER to execute] appear. To execute formatting, press the [ENTER]
button.
* Formatting permanently deletes all data saved on the USB memory device.
5. Exit the menu.
Press the [EXIT] button several times to quit the menu.
Note that USB memory devices not formatted on the V-40HD cannot be recognized.
About Other Features
41