11: Mode; 12: Preset Memory - Roland XS-62S Reference Manual

11: MODE

Menu item Value
This sets the operation mode for video transitions.
PGM-PST
MODE
DISSOLVE
MATRIX

12: PRESET MEMORY

Menu item Value
(*17) MEMORY
LOAD
MEMORY
SAVE
DELETE MEMORY
This specifies the settings loaded at startup.
START UP LAST MEMORY
MEMORY 1–8
MEMORY PROTECT OFF, ON
MEMORY LOAD FADE OFF, ON
(*17) When the [SW MODE] button is lit in blue, the cross-point (upper row) [1]–[8] buttons function as shortcuts for loading to preset memories.
Explanation
(bold text: default value)
You can select the preset video (the video to be output next) for the PVW/2 bus, and after
checking that video, output it to the PGM/1 bus.
You can select the video that you want to output, and immediately output it to the PGM/1 bus.
You can individually select the video that is output to each bus (PGM/1, PVW/2, AUX/3 buses).
Explanation
(bold text: default value)
This selects the preset memory to load. Pressing the [VALUE] knob lets you load the preset
1–8
memory.
This selects a preset memory for saving settings. Pressing the [VALUE] knob lets you save the
settings to the preset memory.
* The state of the [FREEZE] button and [PHONES] knob are not saved to any preset memory.
The [FREEZE] button is always dark at startup.
* The state of the [SW MODE] button and the settings shown below are saved as global
settings for the unit. They are not saved to preset memories.
1–8 Category
REMOTE
LAN CONTROL
SYSTEM
This selects a preset memory to delete. Pressing the [VALUE] knob lets you delete the preset
1–8
memory.
This restores the state that was in effect immediately before the power was turned off (Last
Memory feature). The current settings (Last Memory values) are saved every 4 seconds, and
when you exit a menu.
These recall the settings at the selected memory number.
When this is set to "ON, " the preset memories are protected, and settings cannot be saved to
them.
If this is "ON, " a fade-in/out effect (black screen) is added when a preset memory is recalled.
* If this is "OFF, " the screen might become disordered depending on the content of the preset
memory that is recalled.
Setting items saved in the unit
All setting items except "CAM AF" and "CAM AE"
* "CAM AF" and "CAM AE" are always set to "OFF" at startup.
All menu items
All setting items except "TEST PATTERN" and "TEST TONE"
* "TEST PATTERN" and "TEST TONE" are always set to "OFF" at startup.
Menu List
13