Arrow Storage Products BD88GB Owner's Manual & Assembly Instructions page 31

Step 18
P31
1
From inside the building, put the
bottom of the right door assembly
(on your left when you are inside the
building) behind door jamb into the
front frame track.
2
Position the top of the door so that
the holes in the door line up with the
holes in the door slides.
3
Fasten the door to the door slides
using two #10Bx1/2" (13 mm) screws
per door slide.
NOTE
The holes in the door slides allow
you to adjust the doors. Place the
door in the middle holes.
4
Repeat steps 1 through 3 for the
left door.
Keep this Owner's Manual and Assembly Instructions for future reference.
 Parts Needed For 
Door Installation & Adjustment
Adjustment Holes Allow
Doors to Meet Evenly
Along Their Length
Horizontal Door Brace
Gable
Door Track
Door Slide
Front Floor Frame Assembly
Adjustment Holes
Right
Door
31
 Right Door Assembly (1)
 Left Door Assembly (1)
STEP STEP
2
1
Door Slide
#10Bx1/2" (13 mm)
Screw
STEP
3
Left
STEP
Door
4