Arrow Storage Products BD88GB Owner's Manual & Assembly Instructions page 18

Step 5
BY18
1
Assemble the four corners of
the fl oor frame using two screws at
each corner as shown. At the front
corners fasten bolts through from
the bottom with nuts on top.
2
Measure the fl oor frame diagonally.
When the diagonal measurements
are equal, the fl oor frame is square.
NOTE
If using a wood platform or
concrete slab do not fasten the
fl oor frames to your base at this
time. You will anchor the
building after it is erected.
The fl oor frame must be square
and level or holes will not align.
 Parts Needed For
Floor Frame
STEP
1
18
 Front Floor Assembly (1)

 Side Floor Assembly (2)
 Rear Floor Assembly (1)
RIGHT
REAR
9989
RIGHT
FRONT
When Diagonal Measurements
are Equal the Floor Frame
is Square.
Level
9377
9989
9379
STEP
2