Step 4
B17
The door track assembly supports the
sliding doors and reinforces the front
wall. It is made up of three pieces.
1
Using the door track splice,
(painted), join the door track
(galvanized) pieces end-to-end as
shown.
2
Insert four screws from the under-
side only.
Hint: The holes in the top side of the
door track assembly are for fastening
the gable to the top of the front wall
in a later step.
3
Position door slides onto the
legs, from the end of door track
assembly, as shown in the end view.
4
Set this piece aside for later use.
END VIEW
Parts Needed For
Door Track Assembly
6617
9378
STEP
1
6617
94 5/8"
240,3 cm
STEP
3
94 5/8"
240,3 cm
66769
94 5/8" 240,3 cm
NOTE:
Door Track Splice (painted part)
9378
STEP
2
9378
STEP
4
17
6617 Door Track Splice (1)
9378 Door Track (2)
66769
Long Leg
on Top
Short Leg
on Bottom
9378