Arrow Storage Products BD88GB Owner's Manual & Assembly Instructions page 24

Step 11
BY 24
1
Lift and fasten a right and left gable,
under angle at corner, to the rear wall
angle with screws.
Hint: On the rear gable, use a bolt
and nut at the overlapping rear wall
angle. On the front gable, leave out
2 screws closest to center gable leg.
2
Join the left and right gables
together with a gable brace using
bolts and nuts in the bottom hole only.
3
Repeat Steps 1 & 2 for the door
track on the front of building, except
for the track supports, fasten as
shown.
STEP
3
 Parts Needed For 
Gables/Braces
STEP
1
Gable
Track Supports 6228
24
 Left Gable Assembly (2)
 Right Gable Assembly (2)
 6658 Gable Brace (2)
6658 Gable Brace
STEP
2