Top View - Arrow Storage Products BD88GB Owner's Manual & Assembly Instructions

Step 6
BY19
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this
point if you do not have enough time to
complete the assembly today. A partially
assembled building can be severely
damaged by light winds.
Each screw and bolt in the wall
requires a washer.
CORRECT
1
Position the rear corner panels
at the rear corners, as shown. The
widest part of each rear corner panel
must be placed along the rear of the
building. Attach the corner panels to
the fl oor frame with 4 screws.
2
Position a front corner panel at
the corner of the fl oor frame as sown.
The widest part of each front corner
panel must be placed along the front
of the building. A small gap will exist
between front corner panel and ramp.
Fasten the corner panel to the fl oor
frame with 3 screws.
NOTE
Be careful to install the correct
panel in each position as shown
3
Double-check the part numbers of
the wall panels, before proceeding.
The fl oor frame must be square
and level or holes will not align.
 Parts Needed For 
INCORRECT
Corners
Narrow Side
STEP
1
SIDE
STEP
2
9380
STEP
3
9380
Panels rest on
frame as show
19
 9380 Front Wall Panel (2)
 9384 Rear Corner Panel (2)
Wide Side
9384
REAR

TOP VIEW

FRONT
9384
9384
SIDE
9380
9384
9380
Washer