Arrow Storage Products BD88GB Owner's Manual & Assembly Instructions page 29

Step 16
A29
1
Attach the right and left side
roof trim to the lower end of the roof
panels on each side of the building
using screws at each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2
Using your thumb and index fi nger,
overbend the bottom fl ange of the side
roof trim at the corner inward enough
so the right and left roof trim caps fi t
onto right and left corners.
3
Fasten the roof trim caps to the
side trim using a screw.
4
Fasten the roof panel ribs, peak
caps and ridge caps together using
bolts and nuts.
 Parts Needed For 
Roof Trim
STEP
1
Roof Trim
8836
Peak Cap
8485
STEP
4
Roof Trim Cap
STEP
2
29
 8485 Left Side Roof Trim (2)
 8836 Right Side Roof Trim (2)
8485
Tuck Flange
Inward to Fit
STEP Roof Trim Cap
3
8836
Inside of