Figure 8: Ln2600 Router In The Rack - Juniper LN2600 Hardware Manual

Rugged security router

Hide thumbs Also See for LN2600:

Table of Contents

Documentation

Figure 8: LN2600 Router in the Rack

Slide the LN2600 router from the front side of the rack rails until it touches the rear

side of the rack rails. Ensure that the router sits properly on the rack.

Secure the LN2600 router from the front side with the rack screws.

On the rear side of the two rack rails, insert four cage nuts in the holes specified for

10.

mounting the router. Install the cage nuts from the front of the back rail.

NOTE:

Make sure that the two front cage nuts and the two back cage nuts

are at the same level.

Slide rear support brackets onto rear left and right side flanges of the LN2600 router,

11.

and secure it to the rear side of the rack mounting rails with bracket screws.

Secure the rear support brackets to the four rear cage nuts with screws.

12.

The LN2600 router is now ready for use. Connect the power supply and cabling as

required.

LN2600 Router Physical Specifications on page 81

LN2600 Router Power Requirements on page 83

Powering on the LN2600 Router on page 22

Installing the SFP Transceiver in the LN2600 Router on page 27

Chapter 3: Installing the LN2600 Rugged Security Router

Table of Contents