Figure 10: Ln2600 Router On The Wall-Mounting Unit - Juniper LN2600 Hardware Manual

LN2600 Rugged Security Router Hardware Guide
20
Place the LN2600 router on top of the wall-mount unit aligning the center mounting
6.
posts with the rear screw holes present on the bottom of the LN2600 router.
Secure the LN2600 router using the two screws removed in step 2.
7.

Figure 10: LN2600 Router on the Wall-Mounting Unit

1— Wall-mount screws
2—Wall-mounting unit
Secure the LN2600 router with the wall-mounting unit by attaching two wall-mount
8.
clamps each to the top and bottom of the wall-mounting unit. Secure the clamps
with screws.
On the right side of the wall-mount unit, secure the LN2600 router with eight heat
9.
sink screws.
Install the grounding cable lug over the grounding points on the right of the
10.
wall-mounting unit, and secure them with grounding screws and washers.
3— LN2600 router
Copyright © 2015, Juniper Networks, Inc.