Weatherproofing The Ln2600 Router; Figure 15: Small Form-Factor Pluggable (Sfp) - Juniper LN2600 Hardware Manual

LN2600 Rugged Security Router Hardware Guide
Related
Documentation

Weatherproofing the LN2600 Router

30

Figure 15: Small Form-Factor Pluggable (SFP)

Connector
Locking pin
To remove an SFP:
Place an electrostatic bag or antistatic mat on a flat, stable surface to receive the
1.
SFP. Have ready a rubber safety cap for the SFP transceiver and the cable.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
2.
the strap to one of the ESD points on the chassis.
Label the cable connected to the SFP so that you can later reconnect it to the correct
3.
SFP.
Disconnect the cable from the SFP. Immediately cover the transceiver and the end
4.
of the cable with a rubber safety cap.
Arrange the cable to prevent it from dislodging or developing stress points. Secure
5.
the cable so that it is not supporting its own weight as it hangs to the floor. Place
excess cable out of the way in a neatly coiled loop. Placing fasteners on the loop helps
to maintain its shape.
Pull the ejector handle away from the SFP faceplate to unseat the SFP from the router.
6.
Pull the SFP out of the router, and place it on the antistatic mat or in the electrostatic
bag.
CAUTION: After removing a transceiver from the chassis, wait at least 30
seconds before reinserting it or inserting a transceiver into a different slot.
Issue the CLI show chassis hardware detail
transceivers.
Safety Guidelines for the LN2600 Router on page 49
Safety Warnings for the LN2600 Router on page 50
The LN2600 router is built to withstand water, dust, and unwanted interferences. There
are two parts to securing and weatherproofing the LN2600 router cables—securing the
front interface cables and the power cables, and securing the external cables.
The cable management system, along with the protective top and bottom cover panels,
protects the front interface cables and power cables connected to the LN2600 router.
command to verify the installed
Copyright © 2015, Juniper Networks, Inc.