Brake Release Lever; Cylinder Clutch Lever; Ignition Cut-Out Switch - Ransomes super certes 51 Safety, Operation & Maintenance Manual

6 CONTROLS
6.4

BRAKE RELEASE LEVER

The landroll brake is applied when the hand lever F
is moved to its upper position. To fully release the
landroll brake move the hand lever downwards and
pull the machine backwards.
FOR THE SUPER CERTES ONLY:
THIS MACHINE SHOULD NOT BE PARKED
ON A SLOPE WITHOUT THE TRANSPORT
WHEELS FITTED.
6.5

CYLINDER CLUTCH LEVER

The cylinder clutch is engaged by moving the lever D
downwards and disengaged by moving the lever
upwards.
6.6

IGNITION CUT-OUT SWITCH

The ignition switch is located on the front of the
engine. The engine ignition is switched on by moving
the lever to the 'I' position. To stop the engine close
the throttle and move the switch to the '0' position.
RANSOMES SMALL PEDESTRIAN RANGE
SAFETY, OPERATORS & MAINTENANCE MANUAL
C
C
F
D E
B
F
D E
A
B
A
GB-23