Table of Contents
Advertisement
Lifting & Placing
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
To lift and place machine:
1.
Move shipping crate to installation location.
2.
Move machine work table as close to column
as possible.
3.
Tighten Z-axis and X/Y-axis table locks.
4.
Position lifting sling under headstock, and
connect sling ends to forklift (see Figure 10).
Note: Use caution and make sure lifting sling
does not pinch or bend DRO or power cables.
Lifting
Sling
Figure 10. Lifting sling used to lift G0935.
5.
Use forklift to move machine to final location.
-18-
HEAVY LIFT!
Anchoring to Floor
Number of Mounting Holes ............................ 4
Diameter of Mounting Hardware .................
Anchoring machinery to the floor prevents tipping
or shifting and reduces vibration that may occur
during operation, resulting in a machine that runs
slightly quieter and feels more solid.
If the machine will be installed in a commercial or
workplace setting, or if it is permanently connect-
ed (hardwired) to the power supply, local codes
may require that it be anchored to the floor.
If not required by any local codes, fastening the
machine to the floor is an optional step. If you
choose not to do this with your machine, we rec-
ommend placing it on machine mounts, as these
provide an easy method for leveling and they have
vibration-absorbing pads.
Anchoring to Concrete Floors
Lag shield anchors with lag screws (see below)
are a popular way to anchor machinery to a con-
crete floor, because the anchors sit flush with the
floor surface, making it easy to unbolt and move
the machine later, if needed. However, anytime
local codes apply, you MUST follow the anchoring
methodology specified by the code.
Machine Base
Concrete
Figure 11. Popular method for anchoring
machinery to a concrete floor.
Model G0935 (Mfd. Since 04/21)
⁄
"
1
2
Lag Screw
Flat Washer
Lag Shield Anchor
Drilled Hole
Advertisement
Table of Contents
