Grizzly G0935 Owner's Manual page 36

T25702— 5-Pc. R8 End Mill Holder Set
This all-inclusive set features a precision 3" bor-
ing head, R8 shank, five-piece set of
tipped boring bars, five-piece set of
ing bars, ⁄ " to ⁄ " adapter, wrenches and fitted
1 3
2 4
case.
Figure 46. T25702 5-Pc. R8 End Mill Holder Set. Figure 42. T25702 5-Pc. R8 End Mill Holder Set.
G5680—Adjustable Parallel Set
Create any parallel from
piece adjustable parallel set. Features machined
and ground faces and locking set screws.
Protected in a vinyl pouch.
Figure 47. G5680 Adjustable Parallel Set.
order online at
-34-
⁄ " carbide
3
4
⁄ " HSS bor-
1
2
⁄ " to 2 ⁄ " with this six-
3 1
8 4
www.grizzly.com
T25615—Milling for Home Machinists
This is a project-based course book that provides
a complete introduction to milling and the use of
the milling machine. It assumes no prior knowl-
edge and works through the process of using a
home shop mill from beginning to end.
Figure 48. T25615 Milling for Home Machinists.
G2861—Face Mill
G4051—Replacement Carbide Inserts
This 2 ⁄ " Face Mill accepts four carbide inserts
1
2
(included) and comes with an R8 arbor. It takes a
⁄ "-20 drawbar.
7
16
Figure 49. G2861 Face Mill.
1-800-523-4777
or call
Model G0935 (Mfd. Since 04/21)