Table of Contents
Advertisement
Lifting & Placing
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a fork lift (or other
lifting equipment) rated for
weight of this machine.
To move and place this drill:
1.
place shipping crate near final machine
mounting location.
2.
remove top portion of crate from the ship-
ping pallet, secure the ends of a properly
rated lifting strap around each side of the bar
placed through the lifting holes, and attach it
securely to your power lifting equipment (see
figure 6).
figure 6. strap around bar in lifting hole.
3.
unbolt the machine from the pallet.
4.
With another person to help to steady the
machine, lift it just enough to clear the pallet
and any floor obstacles, then place it in its
final position.
Model G0756 (Mfg. Since 2/13)
hEAvy LIfT!
Bar in
lifting
hole
Anchoring to floor
Anchoring the machine to the floor prevents it
from tipping or shifting and reduces any vibration
that may occur during operation, resulting in a
machine runs slightly quieter and feels more solid.
if the machine will be installed in a commercial or
workplace setting, or if it is permanently connect-
ed (hardwired) to the power supply, local codes
may require that it be anchored to the floor.
if not required by any local codes, fastening the
machine to the floor is an optional step. if you
choose not to do this with your machine, we rec-
ommend placing it on machine mounts, as these
provide an easy method for leveling and they have
vibration-absorbing pads.
Anchoring to concrete floors
lag shield anchors with lag screws (see below)
are a popular way to anchor machinery to a con-
crete floor, because the anchors sit flush with the
floor surface, making it easy to unbolt and move
the machine later, if needed. however, anytime
local codes apply, you Must follow the anchoring
methodology specified by the code.
Machine Base
Concrete
figure 7. popular method for anchoring
machinery to a concrete floor.
Lag Screw
Flat Washer
Lag Shield Anchor
Drilled Hole
-15-
Advertisement
Table of Contents
