Roland VersaCamm VS-640 Service Notes page 87

Pick the both ends of the Damper Joint and remove it from
10
the Damper.
Ink leaks from the Damper right after removing the
Damper Joint.
Pull out the Damper from the Head Cover.
11
Insert the new Damper into the Head Cover.
12
The Damper has no particular right or left orienta-
tion.
Connect the Damper Joint to the Damper with supporting the
13
bottom of the Damper.
Opening the both ends of the Damper Joint makes
you fi x it easily.
Check whether the Damper Joint cannot be re-
moved by pulling up it.
Head Cover
Head Cover
Damper Joint
3-14
Damper Joint
Damper
Damper