Roland VersaCamm VS-640 Service Notes page 104

Remove the screws shown in the fi gure and remove the Auto
9
Sheet Cutter from the Tool Carriage.
Be careful not to lose the spring.
< Rear side >
Spring
Fix the Auto Sheet Cutter to the new Tool Carriage.
10
Do not forget to fi x the spring.
< Rear side >
Spring
Fix the new Tool Carriage Assy with two screws while push-
11
ing it upwards.
Fix the Tool Carriage by pushing it toward the step
of the Cut Carriage Stay.
Step
Tool Carriage
Cut Carriage Stay
Tool Carriage
Auto Sheet Cutter
Screw
Tool Carriage
Screw
3-31
Screw
Auto Sheet Cutter
Screw
Screw