Roland VersaCamm VS-640 Service Notes page 285

Basic Operation
Explain following items in reference to the User's Manual.
Switch On!
!! IMPORTANT !!
Always leave the main power on. Maintenance operation is automatically carried out every 12 hours while the
machine is not in use. Use the sub power switch for the daily powering on and off.
Loading Media
For the stable media feeding, place the middle pinch rollers above all the grit rollers that lie between the left
and right pinch rollers.
Setup of Media
- About [Media Setting] menu
[Media Setting] menu guides the settings in the interactive mode. Using this menu, you can set all of the basic settings
only by setting according to the instructions on the display. The setting details can be stored as the preset menu. The
items set through the [Media Setting] menu can be also set individually.
Setting the Output-start Location
Printing Tests and Cleaning
Setting The Cutting Test And The Blade Force
Pausing and Canceling Output
Switch Off
Keep the loading lever raised when the machine is not in use.
Maintenance: For always using the printer in the best condition
Checking for Remaining Ink and Replacing Cartridges
!! IMPORTANT !!
The remaining ink amount shown on the machine and VersaWorks is only an approximate guide, which may
differ somewhat from the actual amount remaining.
How to Replace Ink Cartridges
!! IMPORTANT !!
- Shake the cartridge gently before installing a ECO-SOL MAX ink cartridge.
- Be sure to replace with an item of identical type. Never mix items of different types.
- Never leave the machine with any ink cartridge removed. The print heads may become clogged.
- Never frequently insert and remove an ink cartridge. Air may leak into the ink tube and be a cause of missing
dots.
- When printing is paused, the coloring at the seam may be altered when printing resumes. Before you perform
lengthy printing, check the amount of ink remaining in the ink cartridges.
- Never store ink at any locations where high temperature may occur or exposed to open flame.
7-8