Roland VersaCamm VS-640 Service Notes page 290

Output Operation Management
Determining What Happens When Ink Runs Out
- [EMPTY MODE]
Returning All Settings to Their Initial Values
When you use metallic silver ink and white ink
* Only for the ink type 8 colors (WMT mode)
Explain following items in reference to the SPECIAL COLOR INK GUIDE.
Characteristics of Inks and Important Notes
- White ink and metallic silver ink precipitate.
- Maintenance must be performed.
- Drying inks
- We strongly recommend lamination.
Before Starting the Day's Work
- The ingredients in white and metallic silver inks tend to settle.
Each day, before starting the day's operations, remove just the white and metallic silver ink cartridges, shake them
gently, then reinsert them.
Creating Printing Data
- Basic Approach for Creating Printing Data
- Creating Data for Printing
Printing With Metallic Silver/CMYKLcLm Color (Both or Individually)
Printing With Metallic Silver/White/CMYK Color in a Single Pass
Printing With White/CMYKLcLm Color (Both or Individually)
All 8 colors (CMYKLcLmWMt) cannot be printed simultaneously.
The following printings are available.
- CMYKLcLmMt printing
- CMYKLcLm printing
- White printing
- CMYKLcLm and White in a Single Pass
- Mt printing
- CMYKMt and White in a Single Pass
Consequently, when CMYKLcLmMt printing, White cannot be printed. And, when CMYKMt and White printing,
LcLm cannot be printed.
!! IMPORTANT !!
In the print mode which uses Mt ink, it may not dry fully depending on the media. In that case, set [
INTERVAL] or raise the temperature of the heaters.
7-13
SCAN