Roland VersaCamm VS-640 Service Notes page 85

Open the Front Cover and move the Tool Carriage with the
4
Head Carriage leftwards to the position where it is not above
the Capping Unit.
Then, disconnect the Tool Carriage from the Head Carriage.
Remove the Carriage Cover.
5
The positions of fi xing screws for the Carriage Cover are at
the left, right and top of the cover.
The Head Carriage Cover has six screws.
Disconnect all Head Ribbon Cables from the Head.
6
Put the disconnected Head Ribbon Cables underneath the
Carriage Board.
3-12
1
2
Carriage Cover