Pass the Ink Tube from No.7 to No.10 through the Support
25
Rail Frame. And, fix them with the Wire Saddle shown in the
figure.
Connect the Ink Tube (Head Carriage Side) to the Joint
26
Adapters, Y Tube Joints and the Circulating Pump.
No.1 to 6 :
1000007188 TUBE,SJ-RDG3*4 LINK6 VS-
640_01
1000007210 TUBE,SJ-RDG3*4 LINK6 VS-540
1000007239 TUBE,SJ-RDG3*4 LINK6 VS-420
1000007255 TUBE,SJ-RDG3*4 LINK6 VS-300
No.7 to 10 :
1000006797 TUBE,SJ-RDG3*4 LINK4 VS-640
1000007211 TUBE,SJ-RDG3*4 LINK4 VS-540
1000007240 TUBE,SJ-RDG3*4 LINK4 VS-420
1000007256 TUBE,SJ-RDG3*4 LINK4 VS-300
When you connect the Ink Tubes, the Ink Tubes
may bend. Do not use the bent Ink Tube.
Revised 3
Confirm that No. 1 to No.10 are lined from the top to
the bottom of the Ink Tubes (Head Carriage Side).
No.1 to 6 :
1000007188 TUBE,SJ-RDG3*4 LINK6 VS-640_01
1000007210 TUBE,SJ-RDG3*4 LINK6 VS-540
1000007239 TUBE,SJ-RDG3*4 LINK6 VS-420
1000007255 TUBE,SJ-RDG3*4 LINK6 VS-300
No.7 to 10 :
1000006797 TUBE,SJ-RDG3*4 LINK4 VS-640
1000007211 TUBE,SJ-RDG3*4 LINK4 VS-540
1000007240 TUBE,SJ-RDG3*4 LINK4 VS-420
1000007256 TUBE,SJ-RDG3*4 LINK4 VS-300
Support Rail Frame
<No.1 to 6>
<No.7 to 10>
<Number on the Ink Tube (Head Carriage Side)>
3-105
Wire Saddle
No.1
No.2
No.3
No.4
No.5
No.6
No.7
No.8
No.9
No.10
Tube Guide