Remove the four rivets as shown in the fi gure for removing
4
the Tool Carriage Board Cover.
Turn on the Sub Power SW while pressing [
5
[
] keys to enter the Service Mode.
Setup the SV-GG on the machine.
Select [CUTTING MENU>[CROPMARK SENS]>[OUTLEVEL
6
CHECK], and press [ENTER] key.
A Crop Mark will be printed.
After printing a Crop Mark, the Tool Carriage moves to above
7
the Crop Mark automatically.
It is not necessary to adjust when the MAX voltage is 2.7
+/-0.2V.
ツールキャリッジボードカバー
], [
] and
4-34
+
MENU
MENU
SERVICE MENU
SERVICE MENU
CUTTING MENU
[ ]
CUTTING MENU
CROPMARK SENSE
[ ]
CROPMARK SENSE
OUTLEVEL CHECK
[ ]
Min2.5V Max2.7V
[2.5V]