Fix the Head with the screws as shown in the fi gure.
13
You do not have to care about the order for fi xing the screws.
Use the 6kgf·cm torque driver (ST-056) and the
hexagonal bit (1000006902 TOOL,BIT HEXAGO-
NAL ST-118) to tighten up the screws.
Bundle the ink tubes with the wire saddles with pushing ink
14
tubes toward the back of the Head Carriage.
Fix the Right Top Cover.
15
Connect the Tool Carriage to the Head Carriage.
16
Then, move the Head Carriage by hand to the lock position.
<Left>
Screw
Wire Saddle
3-8
<Right>
Screw
Right Top Cover