Roland VersaCamm VS-640 Service Notes page 106

Remove the Tool Carriage Cover.
16
Perform the following adjustments and settings.
17
1. [4-4 LIMIT POSITION & CUT DOWN POSITION INITIALIZE]
2. [4-11 TOOL HEIGHT ADJUSTMENT]
3. [4-12 TOOL PRESSURE ADJUSTMENT]
4. [4-7 CROP MARK SENSOR ADJUSTMENT]
5. [4-8 CROP-CUT ADJUSTMENT]
6. [4-9 PRINT / CUT POSITION ADJUSTMENT]
Tool Carriage Cover
3-33