Through-Beam Sensor Heads: Run Mode Functions; Sub-Display Changes - Omron ZX Series Operation Manual

Through-beam Sensor Heads: RUN M ode Functions
3-6 Through-beam Sensor Heads:
RUN Mode Functions
3-6-1

Sub-display Changes

Items shown on the sub-display can be selected.
The threshold values (HIGH/LOW), voltage value, current value, incident
level, and resolution can be selected.
• Voltage display
• Current display
• Incident level display ëëë
• Resolution display
Display values are provided as reference values. There may be
some discrepancies in actual outputs.
The incident level displayed here is different from the one displayed
POINT
on the main display.
ëëë
The voltage level of the linear output is dis-
played.
ëëë
The current level of the linear output is dis-
played.
The incident level is displayed (0 to 100)
ëëë
The resolution of linear output is displayed.
Section 3-6
71