Omron ZX Series Operation Manual page 146

FUN (Function) Mode
Change the set value using the procedure shown in the following figure.
Cancels the setting.
Returns to previous set
value. Flashing stops and
display lights continuously.
n Confirming the Set Value
The flashing set value must be confirmed to be stored. The numeric value
is confirmed using the following method.
Example:
Press the ENT Key.
126
Changes the set value
forward.
Changes the set value.
Cancels the setting.
Returns to previous set
value. Flashing stops and
display lights continuously.
When you finish selecting the set value,
press the ENT Key to confirm the set-
ting.
The set value will be stored in EEPROM
after the display flashes twice and then
lights continuously.
Section 4-5