Changing Numeric Set Values - Omron ZX Series Operation Manual

FUN (Function) Mode
4-5-4

Changing Numeric Set Values

The following procedure is used to change the numeric set value for the
functions that require changing.
Press either the UP or
DOWN Key.
Change the set value using the procedure shown in the following figure.
Moves to a
The digit
higher digit.
being set
flashes.
Decrements the
numeric value.
Change the function to the one that
requires setting using the procedure
given in 4-5-2 Changing the Function.
Press either the UP or DOWN Key to
start changing the setting.
The leftmost digit of the set numeric
value will flash on the sub-display.
Increments the
numeric value.
Moves to a lower digit.
Section 4-5
127