Through-Beam Sensor Heads - Omron ZX Series Operation Manual

Ratings/Specifications
6-1-2

Through-beam Sensor Heads

Item
Applicable Amplifier
Units
Light source
Output
Measurement
distance
Measurement width 1-mm dia.
Minimum sensing
object
Resolution
(See note 1.)
Temperature
characteristic
Ambient
illumination
Ambient
temperature
Ambient humidity
Degree of
protection
Cable length
Weight
(packed state)
Materials
Tightening torque
Accessories
Note 1. This value is obtained by converting the deviation (±3σ) in the linear
output that results when the Sensor Head is connected to the Ampli-
fier Unit, into the measurement width.
2. For a measurement distance of 0 to 500 mm and an average count of
64. The value is 5 μm for an average count of 32. This is the value that
results when a minimum sensing object blocks the light near the cen-
ter of the 1-mm measurement width.
3. For an average count of 64. The value is 5 μm for an average count of
32.
152
ZX-LT001
ZX-LDA11/41
Visible-light semiconductor laser (650-nm wavelength)
0.2 mW max.
0 to 500 mm 500 to
2,000 mm
1- to 2.5-mm
dia.
μ
8- m dia. 8- to 50-
(opaque) dia. (opaque)
μ
---
4 m
(See note 2.)
0.2% F.S./ ° C max.
Incandescent lamp: 10,000 lx max. (on light receiving side)
Operating: 0 to 50 ° C, Storage: − 25 to 70 ° C
(with no icing or condensation)
Operating and storage: 35% to 85%
(with no condensation)
IEC 60529, IP40
Extendable up to 10 m with special extension cable.
Approx. 220 g
Case: Polyetherimide, Case cover: Polycarbonate,
Unit cover: Glass
0.3 N·m max.
Optical axis adjustment seal, sensor head-amplifier connection
cable, instruction sheet
ZX-LT005
0.35 mW max.
0 to 500 mm
5 mm
μ
0.05-mm dia.
m
(opaque)
μ
4 m (See note 3.)
Section 6-1
ZX-LT010
10 mm
0.1-mm dia.
(opaque)