Omron ZX Series Operation Manual page 38

Settings Required before Application
5. Perform the following steps to set the linear output.
Monitor focus
Monitor focus calculations will be performed.
18
Press the ENT Key to select the voltage output.
Press the ENT Key to move to the monitor focus
for the second point .
Press the ENT Key to complete the monitor
focus setting.
OK
End
Section 1-6
Use UP/DOWN/LEFT/RIGHT
Keys to set the focus value of the
first point to 5 V at 100%.
Use UP/DOWN/LEFT/RIGHT
Keys to set the focus value of the
second point to 0 V at 0%.