Mercury MerCruiser 3.0 MPI Installation Manual page 53

SECTION - 6
5. Torque pivot bolts. Bend washer tabs against corresponding flats on bolt heads.
Description
Pivot Bolts
Fastening any items to the steering cables or outer casings prevents normal operation. The
steering cable and outer casing must be free to move back and forth. Do not fasten any items
to the steering cable and outer casing.
6. Connect steering cable as follows:
a.
b.
Tube Ref No.
c.
90-899883183 DECEMBER 2007
a
Manual steering
a - Tab washers
b - Ridge
Remove shipping cap from both ends of steering cable guide tube or control valve spool.
Coat steering cable end with a liberal amount of lubricant.
Description
Special Lubricant 101
34
Install steering cable and secure with hardware as specified.
DRIVE SYSTEM AND ENGINE INSTALLATION
c b
A
7707
c -
NOTICE
Where Used
Steering cable end
Pivot bolts
Nm lb. in.
34
92-802865Q02
lb. ft.
25
Part No.
Page 15 / 54