Table of Contents
Advertisement
IMPORTANT: Identifies information essential to the successful completion of the task.
NOTE: Indicates information that helps in the understanding of a particular step or action.
NOTE: Refer to the appropriate Mercury MerCruiser Product Applications Manual for
application recommendations.
This installation manual has been written and published by Mercury MerCruiser to aid the
boat manufacturer (OEM) in the installation of the products described herein.
It is assumed that these personnel are familiar with marine product installation.
Furthermore, it is assumed that they are familiar with, if not trained in, the recommended
installation procedures of Mercury MerCruiser product.
We could not possibly know of or advise the marine trade of all conceivable installations
and of the possible hazards and/or results of each installation. Therefore, the OEM is
responsible for any installation that does not fulfil the requirements of this manual.
It is the responsibility of the boat manufacturer to select the appropriate engine/transom/
drive package (including the correct gear ratio and propeller) for a given boat. Mercury
MerCruiser recommends that any new or unique hull/power package combination be
thoroughly water tested prior to sale, to verify that the boat performs as desired, and that
the engine operates in the appropriate RPM range.
It is recommended that a Mercury MerCruiser Product Application Engineer (PAE) be
contacted for assistance. For assistance outside the United States, contact the local
Mercury Marine office or authorized distributor.
All information, illustrations and specifications contained in this manual are based on the
latest product information available at time of publication. Mercury Marine reserves the
right to make changes at any time without obligation. As required, revisions to this manual
will be sent to all OEM boat companies.
Page ii
Advertisement
Table of Contents
