SECTION - 9
2. Remove the drain plug from the aft drain plug from the heat exchanger.
3. Clean out the drain hole with a stiff piece of wire until the entire system is drained.
NOTE: It may be necessary to lift or bend hoses to allow water to drain completely.
4. Remove and lower the hose connecting the water inlet to the power steering cooler, or the
water inlet to the heat exchanger.
90-899883183 DECEMBER 2007
a -
Aft heat exchanger drain plug
a -
Power steering cooler
b -
Water inlet to heat exchanger hose
PREDELIVERY PREPARATION AND STORAGE
a
7184
a
b
32651
Page 19 / 24