Cards; Srx5400, Srx5600, And Srx5800 Services Gateway Card; Terminology - Juniper SRX5400 Manual

SRX5400, SRX5600, and SRX5800 Services Gateway Card Reference
Handling and Storing SRX5400, SRX5600, and SRX5800 Services Gateway Cards
SRX5400, SRX5600, and SRX5800 Services Gateway Card Terminology
Related
Documentation
54
SRX5400, SRX5600, and SRX5800 Services Gateway Card Terminology on page 54
Handling an SRX5400, SRX5600, or SRX5800 Services Gateway Card on page 55
Storing an SRX5600, SRX5600, or SRX5800 Services Gateway Card on page 57
Regardless of orientation, this information uses the same terms for all four edges of the
card (see Figure 38 on page
Faceplate—Edge of the card that has connectors to which you connect cables or
sockets in which you insert SFP or XFP transceivers.
Connector edge—Edge opposite the faceplate; this edge has the connectors that attach
to the midplane.
Top edge—Edge at the top of the card when it is vertical.
Bottom edge—Edge at the bottom of the card when it is vertical.
NOTE: This terminology applies to SPCs, IOCs, MPCs, and SCBs in addition
to Routing Engines and port modules.
Figure 38: Card Edges
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 4
54):
Copyright © 2016, Juniper Networks, Inc.