Routing Engine Srx5K-Re-1800X4 Specifications - Juniper SRX5400 Manual

Hide thumbs Also See for SRX5400:

Table of Contents

Serial Number Location

The serial number label is located on the right side of the top of the Routing Engine as shown in

Figure 36 on page 51

Figure 36: SRX5K-RE-13-20 Serial Number Label

Documentation

Routing Engine SRX5K-RE-1800X4 Specifications

Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 4

Switch Control Board SRX5K-SCB Specifications on page 41

Each Routing Engine consists of the following components:

CPU—Runs Junos OS to maintain the routing tables and routing protocols.

DRAM—Provides storage for the routing and forwarding tables and for other Routing

Engine processes.

USB port—Provides a removable media interface through which you can install the

Junos OS manually. Junos OS supports USB version 1.0 and 2.0.

CompactFlash card—Provides primary storage for software images, configuration files,

and microcode. The CompactFlash card is fixed and is inaccessible from outside the

device.

Solid-state drive (SSD)—Provides secondary storage for log files, for generating core

files, and for rebooting the system if the CompactFlash card fails.

NOTE:

The SSD is not a separate field-replaceable unit (FRU).

Interface ports—The

AUX

management devices. Each Routing Engine has one 10/100/1000-Mbps Ethernet port

for connecting to a management network, and two asynchronous serial ports—one for

connecting to a console and one for connecting to a modem or other auxiliary device.

EEPROM—Stores the serial number of the Routing Engine.

Routing Engine SRX5K-RE-1800X4 Specifications

, and

CONSOLE

ETHERNET

ports provide access to

Table of Contents

Srx5600 Srx 5800