Ethernet/Ip Network Configuration; Related Ethernet/Ip Hardware - Omron SYSMAC NY Series Hardware User Manual

2 System Configurations
2-3

EtherNet/IP Network Configuration

The EtherNet/IP network configuration consists of an IPC Machine Controller and the EtherNet/IP De-
vices. You use the built-in EtherNet/IP port on the Panel PC to connect EtherNet/IP Devices.
NY-series
IPC Machine Controller
Additional Information
Refer to the NY-series IPC Machine Controller Industrial Panel PC / Industrial Box PC Built-in
EtherNet/IP Port User's Manual (Cat. No. W563) for EtherNet/IP network configuration details.
2-3-1

Related EtherNet/IP Hardware

IPC Machine Controller
The Machine Controller Software located on the Panel PC is the central controller for machine auto-
mation.
Ethernet port 2 on the Panel PC is the built-in EtherNet/IP port.
Additional Information
• Refer to Relevant Manuals on page 2 for EtherNet/IP related manuals.
• Refer to EtherNet/IP Connector Specifications on page 4-20 for port specifications.
EtherNet/IP Devices
A device that exchanges data with the Machine Controller Software through the EtherNet/IP network.
Additional Information
Refer to the specific EtherNet/IP Device manuals for details.
2-6
Sysmac Studio Automation Software
Port 2
EtherNet/IP
NJ/NX-series
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)
HMI