Omron SYSMAC NY Series Hardware User Manual page 208

7 Maintenance
Correct Touchscreen Functionality with Multiple Monitors
When more than one monitor is connected then Windows can not determine which monitor has the
touch functionality. The result is that touching the touchscreen monitor can result in actions on a differ-
ent connected monitor.
Use the following procedure to correct the touchscreen functionality on monitors of your IPC Machine
Controller.
1
Select the Windows Start Button.
2
In the search field, input Tablet.
3
Select Tablet PC Settings.
The Tablet PC Settings window opens.
4
Select the Setup Button.
An empty screen appears with only the message Touch this screen to identify it as the
touchscreen. If this is not the Table PC screen, press Enter to move to the next screen. To
close the tool, press Esc.
5
Select Enter to move the message to the connected monitor with touch functionality.
6
Touch the screen to indicate it is the correct monitor with touch functionality.
The message appears Press Enter to proceed to the next step to complete your configuration.
7-26
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)