Logo LED
The Logo LED brightness can be changed with the Industrial Monitor Utility.
Additional Information
The Logo LED brightness is adjustable with the Industrial Monitor Utility.
Refer to NY-series IPC Machine Controller Industrial Panel PC / Industrial Box PC Setup User's
Manual (Cat. No. W568) for Industrial Monitor Utility details.
Status LED Indicator
The Status LED indicator provides information about the operating condition of the Panel PC. The Sta-
tus LED brightness can be changed with the Industrial Monitor Utility.
Color
None
Green
Red
Red
Additional Information
• Refer to Industrial Monitor Utility information for brightness adjustment details.
• For Panel PCs without Machine Controller Software the status of this LED can also be de-
fined by the Industrial Monitor API.
• The Industrial Monitor Utility information and the Monitor API information are available:
• For products NY5£ in the NY-series IPC Machine Controller Industrial Panel PC / Industrial
Box PC Setup User's Manual (Cat. No. W568)
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)
Status
Not lit
One of the following situations:
•
The 24 VDC power is not supplied.
•
Normal operation
•
Turned OFF by the Industrial Monitor Utility.
Blinking
Power is currently supplied and the IPC Machine Controller is in
stand-by mode.
Blinking
One of the following situations:
•
Fan Error, only for Panel PCs that have active cooling
•
Battery low
Lit
At maximum brightness in following situations:
•
Power supply undervoltage error
•
Power supply overvoltage error
•
Power supply defective
•
Monitor internal hardware error
At controllable brightness in following situations:
•
Thermal shutdown
•
Watchdog Error
3 Hardware Overview
Meaning
3
3-11