5 Installation
Ground Connection Details
This section provides details about the ground connection.
Use the ground terminal on the backside of the monitor to ground your IPC Machine Controller.
The washers and screw A are pre-mounted at the IPC Machine Controller.
A
C
B
5
Remove the pre-mounted washers and screw A and then mount the ground connection wire C to
the Panel PC B using the washers and screw A .
Tighten the screw with a torque of 1.2 N·m max.
l Crimp terminals
Use crimp terminals with dimensions X = M4 and Y = 8 mm max.
Y X
Y X
5-33
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)