3 Hardware Overview
3-7
Drive Bays
The drive bays are located in the expansion layer.
The drive bays in the IPC Machine Controller accept 2.5 inch Hard Disk Drives (HDD) or Solid State
Drives (SSD). Depending on the model one or two drives are supported.
Additional Information
• Refer to 4-1-5 CPU Specifications on page 4-6 for the number of supported drives.
• Refer to 4-1-7 Storage Device Specifications on page 4-8 for storage device specifications.
• Refer to 5-2-1 Install a Drive on page 5-4 for install information.
• Refer to 7-2-4 Replace a Drive on page 7-11 for maintenance information.
3-22
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)