Install Options; Install A Drive - Omron SYSMAC NY Series Hardware User Manual

5 Installation
5-2

Install Options

This section describes the installable options for the IPC Machine Controller.
5-2-1

Install a Drive

A drive is a storage device for the IPC Machine Controller.
Additional Information
• Depending on the product configuration 0, 1 or 2 drives can be pre-installed.
Refer to 1-4 Product Configuration on page 1-7 for details.
• Depending on the CPU type one or two drives are supported.
Refer to 4-1-5 CPU Specifications on page 4-6 for the number of supported drives.
• Refer to 3-10-4 HDD and SSD Storage Devices on page 3-27 for the recommended drive
models.
• Refer to 4-1-7 Storage Device Specifications on page 4-8 for drive specifications.
Prepare the following items:
• The drive
A drive is not supplied with the Panel PC.
• The drive bracket with mounting screws
These are supplied with the Panel PC.
To install a drive:
1
Ensure the Panel PC is OFF.
2
Remove the drive cover.
1) Push the lock lever
2) Tilt the drive cover
3) Remove the drive cover
5-4
2
3
1
1
.
2
.
3
.
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)