Omron SYSMAC NY Series Hardware User Manual page 116

4 Specifications
4-2-4
Ethernet Connector Specifications
Details of the RJ45 Ethernet connectors are provided below.
There are three Ethernet ports, each with a specific function.
Following ports are available:
• Ethernet (general)
This port is available for the Windows Operating System.
• EtherNet/IP
This port is available for the Machine Controller Software.
Refer to EtherNet/IP Connector Specifications on page 4-20 for more details.
• EtherCAT
This port is available for the Machine Controller Software.
Refer to EtherCAT Connector Specifications on page 4-21 for more details.
The Ethernet connector locks automatically to prevent unintentional disconnection.
3
The view represents the Ethernet connector on the Panel PC.
The Ethernet connectors are designated in the following manner.
• Connector number 1: Ethernet
• Connector number 2: EtherNet/IP
• Connector number 3: EtherCAT
4-18
2 1
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)