Environmental Specifications; Operation Environment Specifications - Omron SYSMAC NY Series Hardware User Manual

4 Specifications
4-4

Environmental Specifications

This section provides environmental specifications of the IPC Machine Controller.
4-4-1

Operation Environment Specifications

The following table provides general environmental specifications for the Industrial Panel PC.
Item
Ambient operating tem-
perature
Ambient storage tempera-
ture
Ambient operating humidi-
ty
Ambient storage humidity
Operating atmosphere
Altitude
Noise resistance (during
operation)
Vibration resistance (dur-
ing operation)
Shock resistance (during
operation)
Material finish
Degree of protection
Pollution degree
*1. Refer to Product Configuration for details.
*2. Refer to 4-4-2 Temperature and Humidity Specifications on page 4-29 for ambient operating temperature
and humidity details per CPU type.
*3. A Panel PC with one or more HDD storage devices should not be used in applications subject to vibration.
Examples of applications subject to vibration:
•
AGV (Automated Guided Vehicles)
•
Rail vehicle
•
Stacker crane
•
Elevator
•
Tableting machine
•
Connector pin assembling machine
•
Bending machine
Ensure your Panel PC with HDD does not vibrate. When in doubt use a Panel PC with SSD storage devi-
ces.
*4. The Panel PC may not operate properly in locations subjected to oil splashes for extended periods of time.
4-28
*1
12.1 inch
*2
0 to 55°C
*2
-20 to 70°C
10% to 90% (with no condensation)
10% to 90% (with no condensation)
No corrosive gases
2,000 m max.
Conforms to IEC 61000-4-4, 2kV (power lines)
The vibration resistance depends on the storage device(s):
•
For a Panel PC with only SSD storage devices: 5 to 8.4Hz with 3.5 mm single
amplitude and 8.4 to 150 Hz with 9.8 m/s² for 10 times each in X, Y and Z direc-
tions. Conforms to IEC 60068-2-6.
•
For a Panel PC with one or more HDD storage devices the Panel PC must be
installed in a vibration free environment.
Conforms to IEC 60068-2-27.
147 m/s², 3 times each in X, Y and Z directions
Applicable for model-ID NY£££-££££-£2£££££££
Nickel plated conforms to ASTM B733-15, SC2
Front of Monitor: IP65 or the equivalent
JIS B3502 and IEC 61131-2: 2 or less
NY-series Industrial Panel PC Machine Controller Hardware User's Manual (W557)
Specifications
*1
15.4 inch
*2
*2
*3
*1
*4
*1
18.5 inch