Connection To An Ethernet/Ip Coupler Unit - Omron sysmac NX Series User Manual

Appendices
Model
NX-PD1000
NX-PF0630
NX-PF0730
NX-PC0020
NX-PC0010
NX-PC0030
NX-TBX01
A-6-2

Connection to an EtherNet/IP Coupler Unit

This section describes the relationship between the unit versions of each Unit, EtherNet/IP Coupler
Unit, CPU Unit and Industrial PC, versions of the Sysmac Studio and NX-IO Configurator, and the
specification changes for each unit version.
Relationship between Unit Versions of Units
The items that are used in the version combination table are given below.
NX Unit
Model Unit version
Model num- Unit version
ber of NX of the NX
Unit. Unit.
The version combination table is given below.
• With the combinations of the unit versions/versions shown below, you can use the functions that are
supported by the unit version of the Unit model. Use the unit versions/versions (or the later/higher
unit versions/versions) that correspond to the NX Unit models and the unit versions. You cannot use
the specifications that were added or changed for the relevant NX Unit models and the unit versions
unless you use the corresponding unit versions/versions.
• Depending on the type and model of the Unit to which the NX Unit is connected, some Units do not
have the corresponding versions given in the table. If a Unit does not have the specified version,
support is provided by the oldest available version after the specified version. Refer to the user's
manuals for the specific Units for the relation between models and versions.
A-32
NX Unit
Unit version
Ver.1.0 Ver.1.0
Corresponding unit versions/versions
Application with an NJ/NX/NY-series
Controller
EtherNet/IP CPU Unit or
Coupler Industrial
Unit PC
Unit version Unit version
of of NJ/NX-
EtherNet/IP series CPU
Coupler Unit Unit or NY-
that is com- series Indus-
patible with trial PC that
the NX Unit. is compatible
with the
EtherNet/IP
Coupler Unit.
Corresponding unit versions/versions
EtherCAT Coupler CPU Unit or Indus-
Unit
Ver.1.05
Application with a CS/CJ/CP-series PLC
EtherNet/IP
Sysmac
Coupler
Studio
Unit
Sysmac Stu- Unit version
dio version of
that is com- EtherNet/IP
patible with Coupler Unit
the NX Unit, that is com-
EtherNet/IP patible with
Coupler Unit, the NX Unit.
CPU Unit,
and Industri-
al PC.
NX-series System Units User's Manual (W523)
Sysmac Studio
trial PC
Ver.1.06
Ver.1.08
Ver.1.06
Sysmac NX-IO Con-
Studio figurator
Sysmac Stu- NX-IO Con-
dio version figurator ver-
that is com- sion that is
patible with compatible
the NX Unit, with the NX
EtherNet/IP Unit, Ether-
Coupler Unit, Net/IP Cou-
and CPU pler Unit, and
Unit. CPU Unit.